Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Khoa học - Công nghệ

Hổ trợ trực tuyến

Phòng Kinh Doanh

Phòng Kinh Doanh

Hotline: 08-37200-184

Sản phẩm mới

Thống kê

Đang online 35
Hôm nay 41
Hôm qua 50
Trong tuần 129
Trong tháng 479
Tổng cộng 35,942

AOIP-Small hot plate (Model:983)

Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Bảo hành: 12 tháng
Xuất xứ: AOIP
Mô tả:

The small hot plate 983 is a lightweight portable calibration system designed for surface mounted sensors. The flat surface plate is made from precision-machined Aluminium. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.

MÔ TẢ SẢN PHẨM

 The small hot plate 983 is a lightweight portable calibration system designed for surface mounted sensors. The flat surface plate is made from precision-machined Aluminium. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.

Good thermal contact is ensured by the flat disc that is recessed to allow the optional use of a heat transfer paste or fluid. Uniform heat distribution is achieved with a flat spiral heater clamped to an integrating block below the surface of the plate. The typical accuracy that can be achieved is 1°C but this will be influenced by the type of sensor to be calibrated.

The internal control sensor is located immediately below the plate’s surface. 

A protective cover that can fit over the block is included along with a comprehensive handbook. 

The temperature range is from 35°C to 350°C, which is set by an advanced, but easy to use temperature controller. The controller has 0.01 resolution below 100°C (0.1°C above 100°C). 

Temperature range 35°C to +350°C
Stabilization time 10 min
Cooling time 350°C to 100°C: 125 min
Heating time 50°C to 350°C: 20 min
Uncertainties Dependant on sensors and method of use
±1°C typical
Calibration volume Flat plate 71 mm diameter

General specifications

 

Size 115 x 230 x 225 mm
Weight 3.9 kg
Display Resolution: 0.01 to 99.99 and 0.1 to 100.0 / 350.0
Units: °C, °F, K
Power supply 100 / 115 V (50/60 Hz) or 200 / 230 V (50/60 Hz)
200 Watts
Communication ports RS 232

 

RESOURCE & DOWNLOAD

Datasheet
 

Vui lòng liên hệ:

CÔNG TY TNHH GIẢI PHÁP VÀ CÔNG NGHỆ ĐO LƯỜNG INO

Địa chỉ: 98/31B, Đường Linh Đông, Phường Linh Đông, Quận Thủ Đức, TP Hồ Chí Minh, Việt Nam 

Tel:  (+84)8.37200.184 |  Fax: (+84)8.37200.197  |  Email: info@ino.com.vn

Hot line: 0939.021.319Website: www.ino.com.vn

để được hỗ trợ !